Sprayers with capacity of 400l, 600l, 800l and 1000l
• Complete for two rows of vines, with a membrane pump of 75l / min at 5 bar.
• Low pressure control, DPM, control by motorized valves for spraying and membrane pump for recycling.
• Height and width manually adjustable for vines from 1.50 m to 3.20 m, glass, trellis or cord. Turn the panels off in the event of a collision.
• Internal tank filter, with suction with isolation valve for filter cleaning, pump outlet filter, section filters, manual wash tank and rinse circuit
Sprayer 400l, 600l, 800l and 1000l
• Complete for two rows of vines, with 75l / min membrane pump at 5 bar.
• Low pressure control, DPM, control by motorized valves for spraying and membrane pump for recycling.
• Manually adjustable height and clearance for vines from 1.50 m to 3.20 m, cup, trellised or cord. Erasing the panels in case of hanging.
• Internal tank filter, with suction with isolation valve for cleaning the filter, pump outlet filter, section filters, hand wash tank and rinsing circuit
The vats
Four capacities, 400l, 600l, 800l or 1000l polyethylene for a perfect cleaning. Attached in the direction of the length, it allows to pass in the narrow vines of 1.50m and up to 3.20m, without option or additional modification. In addition, the chassis is equipped with a foot step at the back for easy filling and incorporation of products.
The signs
For face-to-face treatment Made of fiberglass, they are lightweight and resistant to impact and clashing. Of very particular form, they allow a perfect recovery. The spray is provided by quarter-turn "teejet" anti-drip jets, mounted on a stainless steel tube to ensure height adjustment. Four in number, they are offset from those opposite. In case of hanging assembly of the assembly on spreader.
The pumps
With diaphragm, flow rate 75l / min at 5 bar, with pressure filter at the outlet. A second pump at the back pumps the slurry into the panels. It is disengageable when we carry out weeding.
The regulation
Low pressure and high flow rate for spraying on the order of 1.5 to 3 bar depending on the speed of travel (6km / h on average), aspiration by 4-body diaphragm pump, eliminating all foam problems. DPM and motorized valve controls are standard.
Turbine option
As an option, sprayers with recovery panels can be equipped with 4 centrifugal jet turbines.
The website uses cookies to ensure you get the best experience on our website.